As well as our ever growing modern canvas art section, we recently launched our  metal art range to great success and we've been busy spraying ever since. We do however keep getting questions about the best way to hang these beautiful hand crafted pieces of art on the wall. To make things as simple as possible for you to hang your bespoke artwork, we've pre-drilled the metal and the perspex with four holes, 1 for each corner. Each hole is drilled exactly 1" from either edge. Using these holes, we supply 4 inch sign support bolts to mount the art to the wall.

Fitting is simple: as well as the stand off bolts, you also get 4 screws and 4 raw plugs. You will need to drill four holes in the wall, attach the mount bolt base using the screw. Line up the 4 holes and screw in the end cap. For the metal art (62cm x 55cm) the internal measurements (central point of each hole) measures 620mm x 550mm. This is what it should be, but we recommend that you always measure each other the lengths yourself. The sign support bolts we supply are satin silver, and 20mm in profile. They have a perfect 20mm gap to the wall so that you have the choice to mount a light source behind the art to really draw attention to it. If you like the look of the metal and perspex art, but not sure of the exisiting artwork? Why not contact us with any ideas you might have & we can investigate options of making something to suit your needs.  You can also leave us a note over at our Facebook page to...! New artwork will follow, watch this space..!